Airmar TM 185HW 1kw 150 – 250kHZ High frequency 25° WIDE beam Depth & Temp. 10 pin plug

Features:

• Depth and fast-response water-temperature sensor
• 1 kW with a maximum depth of 152 m (500')
• High frequency: 150 to 250 kHz
• Constant 25° beamwidth
• 100 kHz of total bandwidth from one transducer
• Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
• High-frequency band yields excellent shallow to mid-depth performance, bottom detail, and fish-target separation
• High wide beamwidth delivers more coverage for detecting fish in the upper-water column
• Urethane transom transducer
• Stainless steel bracket for installation on outboard and I/O powered boats
• Recommended for use on planing and displacement hulls
• Also available as thru-hull (B175HW) and in-hull (M285HW) mounts
• Exclusive Xducer ID® technology

Boatcatch™ Large Launch and Retrieve

Boatcatch comes with a universal mounting bracket, U-bolts, washers, nuts, pull cord, bow eye and spacer to suit most boats. Some vessels require minor modification to have a correctly installed system.

This unique device allows you to quickly and efficiently launch and retrieve your boat without setting foot on the ramp and avoiding the increasing issue of Ramp Rage. Boatcatch increases safety and peace of mind launching your boat.

Boatcatch Features:

• Faster Boat Launch and Retrieval
• Drive on and drive off
• One or two-person operation
• 100% Positive Locking
• No more slippery boat ramps
• Heavy Duty Marine grade Stainless Steel
• Lifetime Warranty

Furuno Airmar SS175H-W CHIRP Transducer

The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam, transducer options.

The SS175HW transmits across the following bandwidth:

• High frequency 150 to 250 kHz

The SS175HW is available in three Tilted Element models:

• Fixed 20° tilted version for 16° to 24° hull deadrise
• Fixed 12° tilted version for 8° to 15° hull deadrise
• Fixed 0° tilted version for 0° to 7° hull deadrise

Features

Mark Fish

The unit comes with wiring instructions, a set of 8 x Heatshrink glueline crimp connectors, and a 1 Amp standard blade fuse.

Specifications:

Markfish enclosure is fully sealed against liquid ingress and has integrated mounting holes

• Marine-grade wiring
• Operating Voltage: 9 to15Vdc
• Power consumption: Approx 100mA
• Serial Input: Connects to NMEA 0183 OUT from Fish Finder
• Serial Output: Connects to NMEA 0183 IN of GPS
• Serial Data: 4800 Bits per second, 8 Bit word, No parity, 1 Stop bit.
• External waypoint trigger: Waypoint is sent to GPS when this wire is earthed using a suitable push button. (Button is not included)
• Dimensions: (Approx ) W: 8cm x H: 4cm x D: 2.5cm
• Weight: (Approx) 200 gram

More info at: Mark.fish

Boatcatch™ Small Launch and Retrieve

Boatcatch comes with a universal mounting bracket, U-bolts, washers, nuts, pull cord, bow eye and spacer to suit most boats. Some vessels require minor modification to have a correctly installed system.

This unique device allows you to quickly and efficiently launch and retrieve your boat without setting foot on the ramp and avoiding the increasing issue of Ramp Rage. Boatcatch increases safety and peace of mind launching your boat.

Boatcatch Features:

• Faster Boat Launch and Retrieval
• Drive on and drive off
• One or two-person operation
• 100% Positive Locking
• No more slippery boat ramps
• Heavy Duty Marine grade Stainless Steel
• Lifetime Warranty

Lone Star GX2 Anchor Winch Combo Pack

• Fully sealed motor and gearbox
• 316 stainless and machined & anodised 6061 T-6 aluminium construction
• Triple sealed bearings
• Twin shaft bearing systems
• Machined slimline ‘fast change’ collars, not cast
• Emergency release for safety
• Silicon free, glue-free, paint free design ensures an absolute minimum possible rate degradation and maintenance
• Holds 90m of 8mm Rope + 7m x 8mm chain
• Drop/Retrieve up to 46m per minute
• 3000kg Holding Power at Anchor so no need to tie off
• 1360kg Max Pull (empty drum)
• 110kg recommended max working load