Raymarine EV-200 Sailboat Linear Drive Autopilot with linear drive

EV1 Specifications:

• Nominal Power Supply: 12 V (powered by SeaTalkng system)

• Operating voltage range: 10.8 V to 15.6 V dc

• Power consumption: 30 mA

• SeaTalkng LEN (Load Equivalency Number):1

• Waterproofing rating: IPX 6

• Operating temperature: -20°C to +55°C (-4°F to +131°F)

• Relative Humidity: Max 93%

• Sensors: 3 axis digital accelerometer; 3 axis digital compass and 3 axis gyro digital angular rate sensor

• Data Connections: SeaTalkng
• Weight: 0.29kg (0.64 lbs)

ACU-200 Specifications:

• Drive Current Output: Maximum Continuous 15A at a supply voltage

• Drive Clutch Output: Up to 2.0 A continuous, selectable between 12/24V

• Connections: Rudder reference sensor / Sleep switch0 / Power / Drive motor / Drive clutch / Ground

• Nominal Supply Voltage: 12V or 24V

• Operating Voltage Range: 10.8 V to 31.2 V dc

• Power consumption (standby) – Main Power Supply: 300 mA (12/24V)

• Power consumption (standby) – SeaTalkng Power Supply: 20 mA (12V)

• SeaTalkng LEN (Load Equivalency Number): 1

• SeaTalkng: 3 A at 12V (fuse protected at 3 A)

• Data Connections: SeaTalkng

• Installation Environment: Operating Temperature: -20°C to +55°C  / Storage Temperature: -30°C to +70°C  / Relative Humidity: Max 93%

• Waterproof Rating: Drip resistant

• Dimensions: 285mm (W) x 211.5mm (H) x 64.5mm (D)

• Weight: 2.2kg (4.84lbs)
• Conformance: Australia and New Zealand: C-Tick, Compliances Level 2 / Europe: 2004/108/EC

Mechanical Linear Drive Specifications:

• Max. Boat Displacement: 24,000lb.

• Operating Voltage: 12V DC

• Peak Thrust: 650lb.

• Max Torque: 6,500 lb.in

• Maximum Stroke: 12" (300mm)

• Average Power: 18-36W

• Hard-over to hard-over time: 11 seconds
• Corepack Used: ACU-200

Notes

• A linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer may be required.

• An authorized Raymarine dealer is best suited for installing a linear drive system.

• Must be able to back-drive steering system from the rudder.

Humminbird Helix 9 MSI+ GPS G3N Combo – inc Transom Mount Transducer, Navionics+ Australia Map.

Lone Star GX1 Anchor Winch Combo Pack

• Fully sealed motor and gearbox
• 316 stainless and machined & anodised 6061 T-6 aluminium construction
• Triple sealed bearings
• Twin shaft bearing systems
• Machined slimline ‘fast change’ collars, not cast
• Emergency release for safety
• Silicon free, glue-free, paint free design ensures an absolute minimum possible rate degradation and maintenance
• Holds 60m of 6mm Rope + 8m x8mm topshot & 7m of 6mm chain
• Drop/Retrieve up to 39m per minute
• 3000kg Holding Power at Anchor so no need to tie off
• 1100kg Max Pull (empty drum)
• 100kg recommended max working load

Simrad GO9 XSE Combo – inc. Active Imaging 3-In-1 Transducer & CMAP Max-N

Raymarine EV-200 Powerboat Hydraulic Autopilot, Pack & Type 1 Pump

EV1 Specifications:

• Nominal Power Supply: 12 V (powered by SeaTalk^ng system)
• Operating voltage range: 10.8 V to 15.6 V dc
• Power consumption: 30 mA
• SeaTalk^ng LEN (Load Equivalency Number):1
• Waterproofing rating: IPX 6
• Operating temperature: -20°C to +55°C (-4°F to +131°F)
• Relative Humidity: Max 93%
• Sensors: 3 axis digital accelerometer; 3 axis digital compass and 3 axis gyro digital angular rate sensor
• Data Connections: SeaTalk^ng
• Weight: 0.29kg (0.64 lbs)

ACU-200 Specifications:

• Drive Current Output: Maximum Continuous 15A at a supply voltage
• Drive Clutch Output: Up to 2.0 A continuous, selectable between 12/24V
• Connections: Rudder reference sensor / Sleep switch0 / Power / Drive motor / Drive clutch / Ground
• Nominal Supply Voltage: 12V or 24V
• Operating Voltage Range: 10.8 V to 31.2 V dc
• Power consumption (standby) - Main Power Supply: 300 mA (12/24V)
• Power consumption (standby) - SeaTalk^ng Power Supply: 20 mA (12V)
• SeaTalk^ng LEN (Load Equivalency Number): 1
• SeaTalk^ng: 3 A at 12V (fuse protected at 3 A)
• Data Connections: SeaTalk^ng
• Installation Environment: Operating Temperature: -20°C to +55°C  / Storage Temperature: -30°C to +70°C  / Relative Humidity: Max 93%
• Waterproof Rating: Drip resistant
• Dimensions: 285mm (W) x 211.5mm (H) x 64.5mm (D)
• Weight: 2.2kg (4.84lbs)
• Conformance: Australia and New Zealand: C-Tick, Compliances Level 2 / Europe: 2004/108/EC

p70Rs Control Head.
The Raymarine p70Rs autopilot control head is a push-button/Rotary operation controller designed primarily for sailboats.

Specifications

• Nominal voltage: 12v DC
• Voltage range: 9 to 16 v DC
• Screen size: 3.5" TFT LCD 320 x 240 pixels
• Colours: 16 bit colour (64k colours)
• LCD Brightness: 700cd/m2
• Connections: SeaTalkng (x2) (NMEA2000 and SeaTalk compliant)
• Operating temperature: -030° to 70°C
• Relative humidity: 93% max.
• Waterproofing: IPX6
• Conformance: Europe 2004/108/EC. Australia and New Zealand C-Tick compliance level 2

Simrad NSS9 Evo3 & Halo 20+ Radar Bundle – no Transducer or Map