TM265LH 1kw Depth/Temp.(c/w 12 pin Furuno plug) c/w bracket – Chirp-ready Transom Mount

Features:

• Depth and fast-response water-temperature sensor
• 1 kW of power for great deep-water performance
• Low frequency: 42 to 65 kHz
• 25° to 16° port-starboard beamwidth
• Maximum depth of 914 m (3,000')
• High frequency: 130 to 210 kHz
• 10° to 6° beamwidth
• Maximum depth of 304 m (1,000')
• 103 kHz of total bandwidth from one transducer
• Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
• Transom-mount, urethane housing with a stainless steel bracket for installation on boats of all propulsion types
• Also available as cavity (CM265LH), thru-hull (B265LH), in-hull (M265LH), and pocket/keel (PM265LH) mounts
• Exclusive Xducer ID® technology

Furuno CA 82B-35R 2kw Transducer

Features:

• 2 kW
• Selectable frequency - 65kHz to 110kHz
• Beam angle becomes sharper at higher frequencies:
• 68kHz = 12.5 degrees
• 88kHz = 9.6 degrees
• 107kHz = 7.7 degrees
• Rugged FRP construction - tank mounted
• 15 meter cable, no connector provided
•  *88kHz frequency only

Furuno FCV-588 Fishfinder

Mark Fish

The unit comes with wiring instructions, a set of 8 x Heatshrink glueline crimp connectors, and a 1 Amp standard blade fuse.

Specifications:

Markfish enclosure is fully sealed against liquid ingress and has integrated mounting holes

• Marine-grade wiring
• Operating Voltage: 9 to15Vdc
• Power consumption: Approx 100mA
• Serial Input: Connects to NMEA 0183 OUT from Fish Finder
• Serial Output: Connects to NMEA 0183 IN of GPS
• Serial Data: 4800 Bits per second, 8 Bit word, No parity, 1 Stop bit.
• External waypoint trigger: Waypoint is sent to GPS when this wire is earthed using a suitable push button. (Button is not included)
• Dimensions: (Approx ) W: 8cm x H: 4cm x D: 2.5cm
• Weight: (Approx) 200 gram

More info at: Mark.fish

Lone Star GX2 Anchor Winch Combo Pack

• Fully sealed motor and gearbox
• 316 stainless and machined & anodised 6061 T-6 aluminium construction
• Triple sealed bearings
• Twin shaft bearing systems
• Machined slimline ‘fast change’ collars, not cast
• Emergency release for safety
• Silicon free, glue-free, paint free design ensures an absolute minimum possible rate degradation and maintenance
• Holds 90m of 8mm Rope + 7m x 8mm chain
• Drop/Retrieve up to 46m per minute
• 3000kg Holding Power at Anchor so no need to tie off
• 1360kg Max Pull (empty drum)
• 110kg recommended max working load

Raymarine 12V Hydraulic Drive Pumps type 3