Raymarine 12V Hydraulic Drive Pumps type 1

Mark Fish

The unit comes with wiring instructions, a set of 8 x Heatshrink glueline crimp connectors, and a 1 Amp standard blade fuse.

Specifications:

Markfish enclosure is fully sealed against liquid ingress and has integrated mounting holes

• Marine-grade wiring
• Operating Voltage: 9 to15Vdc
• Power consumption: Approx 100mA
• Serial Input: Connects to NMEA 0183 OUT from Fish Finder
• Serial Output: Connects to NMEA 0183 IN of GPS
• Serial Data: 4800 Bits per second, 8 Bit word, No parity, 1 Stop bit.
• External waypoint trigger: Waypoint is sent to GPS when this wire is earthed using a suitable push button. (Button is not included)
• Dimensions: (Approx ) W: 8cm x H: 4cm x D: 2.5cm
• Weight: (Approx) 200 gram

More info at: Mark.fish

Lone Star GX1 Anchor Winch Combo Pack

• Fully sealed motor and gearbox
• 316 stainless and machined & anodised 6061 T-6 aluminium construction
• Triple sealed bearings
• Twin shaft bearing systems
• Machined slimline ‘fast change’ collars, not cast
• Emergency release for safety
• Silicon free, glue-free, paint free design ensures an absolute minimum possible rate degradation and maintenance
• Holds 60m of 6mm Rope + 8m x8mm topshot & 7m of 6mm chain
• Drop/Retrieve up to 39m per minute
• 3000kg Holding Power at Anchor so no need to tie off
• 1100kg Max Pull (empty drum)
• 100kg recommended max working load

TM265LH 1kw Depth/Temp.(c/w 12 pin Furuno plug) c/w bracket – Chirp-ready Transom Mount

Features:

• Depth and fast-response water-temperature sensor
• 1 kW of power for great deep-water performance
• Low frequency: 42 to 65 kHz
• 25° to 16° port-starboard beamwidth
• Maximum depth of 914 m (3,000')
• High frequency: 130 to 210 kHz
• 10° to 6° beamwidth
• Maximum depth of 304 m (1,000')
• 103 kHz of total bandwidth from one transducer
• Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
• Transom-mount, urethane housing with a stainless steel bracket for installation on boats of all propulsion types
• Also available as cavity (CM265LH), thru-hull (B265LH), in-hull (M265LH), and pocket/keel (PM265LH) mounts
• Exclusive Xducer ID® technology

Simrad AP44 Medium Capacity Virtual Rudder Pack – inc AP44, NAC-2, Precision9, RPU80

Simrad AP44 Specifications

• Weight - 0,32 kg (0,7 lbs)
• NMEA 2000 Connectivity - 1 X NMEA2000 Micro-C port 3 LEN
• Power Consumption typical - 1,35W
• Power Consumption max - 1,8W
• Dimensions W x H x D - 118 x 115 x 48,5mm (4,6 x 4,5 x 1,9")
• Supply Voltage - 12V DC (10,8-15,6V DC)
• Warranty Period - 2 years
• Operating Temperature Range - -25° to +65ºC (-13°F to +149 ºF)
• Compass Safe - 300MM (11,8")
• Display Resolution - 320 x 240, 4:3
• Storage Temperature Range - -40° to +85ºC (-40°F to +185 ºF)
• Screen Brightness - 600 nits
• Viewing Angles - 80° top/bottom, 80° left/right
• Approvals Compliance - CE 60945
• Manouevres Turn Patterns - C-turn, U-turn, Spiral, Zigzag, Square, S-turn, Depth countertracking, Tack, Gybe
• Mounting Type - Flush
• Steering Modes - Heading, No drift, Waypoint Steering(NAV), Wind, Power Steer(FU)
• Waterproofrating - IPx7
• Interface - Keypad and rotary dial
• Compasssensor support - NMEA 2000
• Humidity - Up to 100% RH
• Engine Drive systems integration - Volvo EVC, Yamaha, Optimus(Seastar)
• Backlight Color - White

Precision 9 Specifications:

• Heading Sensor Accuracy: +/-2deg. After calibration
• Weight: 0,165kg + 0,130kg(bracket)
• Power Consumption max: 0,4W (N2K Load 1 len)
• N2K PGNs: 127250, 127251, 127257, 127252
• Supply Voltage: 12V DC (8-16V DC) via NMEA2000
• NMEA 2000 Connectivity: 1x NMEA 20000 Micro-C port, 1 LEN
• Warranty Period: 2 Years
• Operating Temperature Range: -25 to + 65ºC (-13 to + 149ºF)
• Storage Temperature Range: -30 to + 70ºC (-22 to + 158ºF)
• Dimensions W x H x D: 36 x 119 x 119mm (1,42 x 4,69 x 4,69")
• Compass Safe: 500mm (1,7")
• Mounting Type: Bracket, Bulkhead
• Approvals Compliance: CE under EMC directive 2014/30/EU
• Waterproofrating: IPx7
• Heading Sensor Data Available: Magnetic heading, rate of turn, pitch/roll, heave
• Sensor Type: Solid state, rate stabilized

NAC-2 Features:

• Reliable performance with Simrad's Continuum steering technology algorithms and computation
• 8 >Amps continuous, 16 >Amps peak output
• 3 Amp Clutch output
• Compatible with low-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves
• Virtual >Rudder feedback simplifies installation with outboard and sterndrive (inboard/outboard) boats
• Plug and play connection
• NMEA2000 connectivity to Heading sensors, >Rudder feedbacks, dedicated Autopilot controllers and MFDs
• Recommended for boats up to 10m

Garmin – Compact Reactor™ 40 Hydraulic Autopilot with GHC™ 20 Corepack

An autopilot provides accurate navigation to a waypoint or destination. When the system is coupled with a multifunction display or GPS it will give safe passage around markers or hazards automatically.

System Features:

Includes: GHP Reactor, GHC 20 Helm control display, 1 x 1.0 L Pump, 1 x buzzer/ alarm, 1 x ECU & power cable, 1 x CCU/ECU Interconnect cable, NMEA 2000 power cable, NMEA 2000 drop cables (2m), NMEA 2000 T-connectors, plus male and female terminators

GHP Reactor Specifications:

• Temperature range: -15°C to 55°C
• Case material: Fully gasketed, high-impact plastic
• IPX7 waterproof protection
• CCU cable length: 9.5 ft (3m)
• NMEA 2000 power input: 9-16V
• NMEA 2000 LEN: 3 (150 mA)

GHC 20 Specifications:

• Display: QVGA color LCD display, 320 x 240 Pixels (1000nits brightness)
• IPX7 waterproof protection
• Power: 9-16 VDC, up to 32 VDC
• Max power consumption 12/24V: 200 mA/100 mA
• NMEA output: NMEA 0183, NMEA 2000
• Operating temperature: -15° C to 70 C°

Buzzer/Alarm Specifications:

• Dimensions: 23mmL x 25mmDia
• Weight: 68g
• Temperature range: -15°C to 55°C
• Cable length: 10 ft (3m)