Humminbird Helix 9 MSI+ GPS G3N Combo – inc Transom Mount Transducer, Navionics+ Australia Map.

Raymarine Type 1 Mechanical Linear Drive 12V

Mechanical Linear Drive Specifications:

• Max. Boat Displacement: 24,000lb.
• Operating Voltage: 12V DC
• Peak Thrust: 650lb.
• Max Torque: 6,500 lb.in
• Maximum Stroke: 12" (300mm)
• Average Power: 18-36W
• Hard-over to hard-over time: 11 seconds
• Corepack Used: ACU-200

Notes

• A linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer may be required.
• An authorized Raymarine dealer is best suited for installing a linear drive system.
• Must be able to back-drive steering system from the rudder.

Lowrance/Simrad Airmar SS175H-W CHIRP Transducer

The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam, transducer options.

The SS175HW transmits across the following bandwidth:

• High frequency 150 to 250 kHz

The SS175HW is available in three Tilted Element models:

• Fixed 20° tilted version for 16° to 24° hull deadrise
• Fixed 12° tilted version for 8° to 15° hull deadrise
• Fixed 0° tilted version for 0° to 7° hull deadrise

Features

• Depth and fast-response water-temperature sensor
• 1 kW with a maximum depth of 152 m (500')
• High frequency: 150 to 250 kHz
• Constant 25° beam
• 100 kHz of total bandwidth from one transducer
• Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
• High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
• High wide beamwidth yields more coverage for detecting fish in the upper-water column
• Low-profile, thru-hull housing provides good resolution at speed when installed properly
• Stainless steel housing for use on stepped, planing or displacement hulls made of fibreglass, wood or metal
• Stainless steel housing for use on stepped, planing or displacement hull
• Also available in a bronze housing (B175HW) and as a transom (TM185HW), or in-hull (M285HW) mount
• Exclusive Xducer ID^® technology

Furuno GP-1971F Combo with P66 Transducer & CMAP 4D Continental

Airmar TM 185HW 1kw 150 – 250kHZ High frequency 25° WIDE beam Depth & Temp. 10 pin plug

Features:

• Depth and fast-response water-temperature sensor
• 1 kW with a maximum depth of 152 m (500')
• High frequency: 150 to 250 kHz
• Constant 25° beamwidth
• 100 kHz of total bandwidth from one transducer
• Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
• High-frequency band yields excellent shallow to mid-depth performance, bottom detail, and fish-target separation
• High wide beamwidth delivers more coverage for detecting fish in the upper-water column
• Urethane transom transducer
• Stainless steel bracket for installation on outboard and I/O powered boats
• Recommended for use on planing and displacement hulls
• Also available as thru-hull (B175HW) and in-hull (M285HW) mounts
• Exclusive Xducer ID® technology

Mark Fish

The unit comes with wiring instructions, a set of 8 x Heatshrink glueline crimp connectors, and a 1 Amp standard blade fuse.

Specifications:

Markfish enclosure is fully sealed against liquid ingress and has integrated mounting holes

• Marine-grade wiring
• Operating Voltage: 9 to15Vdc
• Power consumption: Approx 100mA
• Serial Input: Connects to NMEA 0183 OUT from Fish Finder
• Serial Output: Connects to NMEA 0183 IN of GPS
• Serial Data: 4800 Bits per second, 8 Bit word, No parity, 1 Stop bit.
• External waypoint trigger: Waypoint is sent to GPS when this wire is earthed using a suitable push button. (Button is not included)
• Dimensions: (Approx ) W: 8cm x H: 4cm x D: 2.5cm
• Weight: (Approx) 200 gram

More info at: Mark.fish