An autopilot provides accurate navigation to a waypoint or destination. When the system is coupled with a multifunction display or GPS it will give safe passage around markers or hazards automatically.
System Features:
Includes: GHP Reactor, GHC 20 Helm control display, 1 x 1.0 L Pump, 1 x buzzer/ alarm, 1 x ECU & power cable, 1 x CCU/ECU Interconnect cable, NMEA 2000 power cable, NMEA 2000 drop cables (2m), NMEA 2000 T-connectors, plus male and female terminators
GHP Reactor Specifications:
Temperature range: -15°C to 55°C
Case material: Fully gasketed, high-impact plastic
IPX7 waterproof protection
CCU cable length: 9.5 ft (3m)
NMEA 2000 power input: 9-16V
NMEA 2000 LEN: 3 (150 mA)
GHC 20 Specifications:
Display: QVGA color LCD display, 320 x 240 Pixels (1000nits brightness)
Raymarine EV-200 Sailboat Linear Drive Autopilot with linear drive
EV1 Specifications:
Nominal Power Supply: 12 V (powered by SeaTalkng system)
Operating voltage range: 10.8 V to 15.6 V dc
Power consumption: 30 mA
SeaTalkng LEN (Load Equivalency Number):1
Waterproofing rating: IPX 6
Operating temperature: -20°C to +55°C (-4°F to +131°F)
Relative Humidity: Max 93%
Sensors: 3 axis digital accelerometer; 3 axis digital compass and 3 axis gyro digital angular rate sensor
Data Connections: SeaTalkng
Weight: 0.29kg (0.64 lbs)
ACU-200 Specifications:
Drive Current Output: Maximum Continuous 15A at a supply voltage
Drive Clutch Output: Up to 2.0 A continuous, selectable between 12/24V
Connections: Rudder reference sensor / Sleep switch0 / Power / Drive motor / Drive clutch / Ground
Nominal Supply Voltage: 12V or 24V
Operating Voltage Range: 10.8 V to 31.2 V dc
Power consumption (standby) – Main Power Supply: 300 mA (12/24V)
Power consumption (standby) – SeaTalkng Power Supply: 20 mA (12V)
SeaTalkng LEN (Load Equivalency Number): 1
SeaTalkng: 3 A at 12V (fuse protected at 3 A)
Data Connections: SeaTalkng
Installation Environment: Operating Temperature: -20°C to +55°C / Storage Temperature: -30°C to +70°C / Relative Humidity: Max 93%
Waterproof Rating: Drip resistant
Dimensions: 285mm (W) x 211.5mm (H) x 64.5mm (D)
Weight: 2.2kg (4.84lbs)
Conformance: Australia and New Zealand: C-Tick, Compliances Level 2 / Europe: 2004/108/EC
Mechanical Linear Drive Specifications:
Max. Boat Displacement: 24,000lb.
Operating Voltage: 12V DC
Peak Thrust: 650lb.
Max Torque: 6,500 lb.in
Maximum Stroke: 12″ (300mm)
Average Power: 18-36W
Hard-over to hard-over time: 11 seconds
Corepack Used: ACU-200
Notes
A linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer may be required.
An authorized Raymarine dealer is best suited for installing a linear drive system.
Must be able to back-drive steering system from the rudder.
A linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer may be required.
An authorized Raymarine dealer is best suited for installing a linear drive system.
Must be able to back-drive steering system from the rudder.