Lone Star GX1 Anchor Winch Combo Pack

• Fully sealed motor and gearbox
• 316 stainless and machined & anodised 6061 T-6 aluminium construction
• Triple sealed bearings
• Twin shaft bearing systems
• Machined slimline ‘fast change’ collars, not cast
• Emergency release for safety
• Silicon free, glue-free, paint free design ensures an absolute minimum possible rate degradation and maintenance
• Holds 60m of 6mm Rope + 8m x8mm topshot & 7m of 6mm chain
• Drop/Retrieve up to 39m per minute
• 3000kg Holding Power at Anchor so no need to tie off
• 1100kg Max Pull (empty drum)
• 100kg recommended max working load

Furuno GP-1971F Combo with P66 Transducer & CMAP 4D Continental

TM275LH-W 1kw WIDE Depth/Temp.(c/w 12 pin Furuno plug) c/w bracket

Features

• Depth and fast-response water-temperature sensor
• 1 kW for great deep-water performance from the low frequency
• Low frequency: 42 to 65 kHz
• 25° to 16° beam
• Maximum depth of 914 m (3,000')
• High frequency: 150 to 250 kHz
• 25° constant beamwidth
• Maximum depth of 914 m (3,000')
• 123 kHz of total bandwidth from one transducer
• Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
• High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
• High wide beamwidth yields more coverage for detecting fish in the upper-water column
• Transom mount, urethane transducer
• Stainless steel, kick-up bracket locks in the “up” position and will not damage the transom
• Also available as a thru-hull (B275LHW) and pocket/keel (PM275LHW) mount
• Exclusive Xducer ID® technology

Simrad AP44 Medium Capacity Virtual Rudder Pack – inc AP44, NAC-2, Precision9, RPU80

Simrad AP44 Specifications

• Weight - 0,32 kg (0,7 lbs)
• NMEA 2000 Connectivity - 1 X NMEA2000 Micro-C port 3 LEN
• Power Consumption typical - 1,35W
• Power Consumption max - 1,8W
• Dimensions W x H x D - 118 x 115 x 48,5mm (4,6 x 4,5 x 1,9")
• Supply Voltage - 12V DC (10,8-15,6V DC)
• Warranty Period - 2 years
• Operating Temperature Range - -25° to +65ºC (-13°F to +149 ºF)
• Compass Safe - 300MM (11,8")
• Display Resolution - 320 x 240, 4:3
• Storage Temperature Range - -40° to +85ºC (-40°F to +185 ºF)
• Screen Brightness - 600 nits
• Viewing Angles - 80° top/bottom, 80° left/right
• Approvals Compliance - CE 60945
• Manouevres Turn Patterns - C-turn, U-turn, Spiral, Zigzag, Square, S-turn, Depth countertracking, Tack, Gybe
• Mounting Type - Flush
• Steering Modes - Heading, No drift, Waypoint Steering(NAV), Wind, Power Steer(FU)
• Waterproofrating - IPx7
• Interface - Keypad and rotary dial
• Compasssensor support - NMEA 2000
• Humidity - Up to 100% RH
• Engine Drive systems integration - Volvo EVC, Yamaha, Optimus(Seastar)
• Backlight Color - White

Precision 9 Specifications:

• Heading Sensor Accuracy: +/-2deg. After calibration
• Weight: 0,165kg + 0,130kg(bracket)
• Power Consumption max: 0,4W (N2K Load 1 len)
• N2K PGNs: 127250, 127251, 127257, 127252
• Supply Voltage: 12V DC (8-16V DC) via NMEA2000
• NMEA 2000 Connectivity: 1x NMEA 20000 Micro-C port, 1 LEN
• Warranty Period: 2 Years
• Operating Temperature Range: -25 to + 65ºC (-13 to + 149ºF)
• Storage Temperature Range: -30 to + 70ºC (-22 to + 158ºF)
• Dimensions W x H x D: 36 x 119 x 119mm (1,42 x 4,69 x 4,69")
• Compass Safe: 500mm (1,7")
• Mounting Type: Bracket, Bulkhead
• Approvals Compliance: CE under EMC directive 2014/30/EU
• Waterproofrating: IPx7
• Heading Sensor Data Available: Magnetic heading, rate of turn, pitch/roll, heave
• Sensor Type: Solid state, rate stabilized

NAC-2 Features:

• Reliable performance with Simrad's Continuum steering technology algorithms and computation
• 8 >Amps continuous, 16 >Amps peak output
• 3 Amp Clutch output
• Compatible with low-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves
• Virtual >Rudder feedback simplifies installation with outboard and sterndrive (inboard/outboard) boats
• Plug and play connection
• NMEA2000 connectivity to Heading sensors, >Rudder feedbacks, dedicated Autopilot controllers and MFDs
• Recommended for boats up to 10m

Furuno 525T-PWD 600w T/M Biducer – Airmar P66 & Bracket

Features:

• Plastic Transom Mount Transducer with Temp, 600W (10-Pin)
• 30 Foot Cable with 10-Pin Connector
• Beam Angle45 and 12 Degrees
• Frequency50 and 200 kHz
• Housing TypePlastic
• Install TypeTransom Mount
• Power Rating600 W
• Shipping Info5 lbs, 1 Carton, 12x9x6

Airmar TM 185HW 1kw 150 – 250kHZ High frequency 25° WIDE beam Depth & Temp. 10 pin plug

Features:

• Depth and fast-response water-temperature sensor
• 1 kW with a maximum depth of 152 m (500')
• High frequency: 150 to 250 kHz
• Constant 25° beamwidth
• 100 kHz of total bandwidth from one transducer
• Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
• High-frequency band yields excellent shallow to mid-depth performance, bottom detail, and fish-target separation
• High wide beamwidth delivers more coverage for detecting fish in the upper-water column
• Urethane transom transducer
• Stainless steel bracket for installation on outboard and I/O powered boats
• Recommended for use on planing and displacement hulls
• Also available as thru-hull (B175HW) and in-hull (M285HW) mounts
• Exclusive Xducer ID® technology