Raymarine EV-200 Sailboat Linear Drive Autopilot with linear drive

EV1 Specifications:

• Nominal Power Supply: 12 V (powered by SeaTalkng system)

• Operating voltage range: 10.8 V to 15.6 V dc

• Power consumption: 30 mA

• SeaTalkng LEN (Load Equivalency Number):1

• Waterproofing rating: IPX 6

• Operating temperature: -20°C to +55°C (-4°F to +131°F)

• Relative Humidity: Max 93%

• Sensors: 3 axis digital accelerometer; 3 axis digital compass and 3 axis gyro digital angular rate sensor

• Data Connections: SeaTalkng
• Weight: 0.29kg (0.64 lbs)

ACU-200 Specifications:

• Drive Current Output: Maximum Continuous 15A at a supply voltage

• Drive Clutch Output: Up to 2.0 A continuous, selectable between 12/24V

• Connections: Rudder reference sensor / Sleep switch0 / Power / Drive motor / Drive clutch / Ground

• Nominal Supply Voltage: 12V or 24V

• Operating Voltage Range: 10.8 V to 31.2 V dc

• Power consumption (standby) – Main Power Supply: 300 mA (12/24V)

• Power consumption (standby) – SeaTalkng Power Supply: 20 mA (12V)

• SeaTalkng LEN (Load Equivalency Number): 1

• SeaTalkng: 3 A at 12V (fuse protected at 3 A)

• Data Connections: SeaTalkng

• Installation Environment: Operating Temperature: -20°C to +55°C  / Storage Temperature: -30°C to +70°C  / Relative Humidity: Max 93%

• Waterproof Rating: Drip resistant

• Dimensions: 285mm (W) x 211.5mm (H) x 64.5mm (D)

• Weight: 2.2kg (4.84lbs)
• Conformance: Australia and New Zealand: C-Tick, Compliances Level 2 / Europe: 2004/108/EC

Mechanical Linear Drive Specifications:

• Max. Boat Displacement: 24,000lb.

• Operating Voltage: 12V DC

• Peak Thrust: 650lb.

• Max Torque: 6,500 lb.in

• Maximum Stroke: 12" (300mm)

• Average Power: 18-36W

• Hard-over to hard-over time: 11 seconds
• Corepack Used: ACU-200

Notes

• A linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer may be required.

• An authorized Raymarine dealer is best suited for installing a linear drive system.

• Must be able to back-drive steering system from the rudder.

Garmin – Compact Reactor™ 40 Hydraulic Autopilot with GHC™ 20 Corepack

An autopilot provides accurate navigation to a waypoint or destination. When the system is coupled with a multifunction display or GPS it will give safe passage around markers or hazards automatically.

System Features:

Includes: GHP Reactor, GHC 20 Helm control display, 1 x 1.0 L Pump, 1 x buzzer/ alarm, 1 x ECU & power cable, 1 x CCU/ECU Interconnect cable, NMEA 2000 power cable, NMEA 2000 drop cables (2m), NMEA 2000 T-connectors, plus male and female terminators

GHP Reactor Specifications:

• Temperature range: -15°C to 55°C
• Case material: Fully gasketed, high-impact plastic
• IPX7 waterproof protection
• CCU cable length: 9.5 ft (3m)
• NMEA 2000 power input: 9-16V
• NMEA 2000 LEN: 3 (150 mA)

GHC 20 Specifications:

• Display: QVGA color LCD display, 320 x 240 Pixels (1000nits brightness)
• IPX7 waterproof protection
• Power: 9-16 VDC, up to 32 VDC
• Max power consumption 12/24V: 200 mA/100 mA
• NMEA output: NMEA 0183, NMEA 2000
• Operating temperature: -15° C to 70 C°

Buzzer/Alarm Specifications:

• Dimensions: 23mmL x 25mmDia
• Weight: 68g
• Temperature range: -15°C to 55°C
• Cable length: 10 ft (3m)

Furuno FCV-588 Fishfinder

Simrad NSS9 Evo3 Combo – inc. internal GPS, no map or Transducer

Raymarine 12V Hydraulic Drive Pumps type 3

Lowrance Elite9 Ti2 Combo inc 3-in-1 Transducer & embedded C-Map