Raymarine - Nautek Marine

Raymarine RD424HD 4kw Radar

nm_admin — Mon, 07 Mar 2022 04:12:53 +0000

Signal Processing: HD Color
Compatible With: aSeries Multifunction Displays | c Series Multifunction Displays | e Series Multifunction Displays | NEW eS Series Multifunction Displays | gS Series Multifunction Displays | C Series Widescreen Multifunction Displays | E Series Widescreen Multifunction Displays | G Series Multifunction Navigation
Networking: SeaTalkHS
Peak Power Output (kW): 4.0 kW (nominal)
Antenna Type: Patch Array
Beam Width (Nominal): 3.9° horizontal, 25° vertical
Polarization: Horizontal
Rotation Rate: Range less than 3 miles – 48 RPM (radar switches to 48 RPM automatically, unless 24 RPM is selected) | Range greater than 3 miles – 24 RPM (nominal)
CE Approval: Conforms to 1999/5/EC
FCC Approval: Conforms to 47CFR Part 2 and Part 80
Dimensions: 25.7in x 9.7in (652 x 247 mm)
Weight: 22lbs (10 kg)
Input Voltage: 12 – 24 V DC
Power Consumption: 60 W (25 W Standby)
Temperature Range: 14°F to 131°F (-10° to +55°C)
Humidity Limit: up to 95% at 35°C
Maximum Operating Wind Speed: 100 kts
Maximum Range Scale: 48 nm
IF Frequency: 70 MHz (nominal)
Receiver Characteristic: Linear
Receiver Noise Figure: Less than 5 dB (including Low Noise Converter/Limiter & IF Receiver)
Receiver Bandwidth: Matched digital filter for each pulse length
Transmitting Frequency: 9405 +/– 25 MHz
Transmitter: Solid-state modulator driving Magnetron
Standby Mode: Magnetron heater and control left on, all other services off
Duplexer: Circulator

Raymarine Quantum 2 CHIRP Radar – inc. 10m cable

nm_admin — Mon, 07 Mar 2022 04:12:52 +0000

Doppler moving target display allows for superior situational awareness at-a-glance
Fully automatic MARPA target tracking, along with manual MARPA mode
Adjustable TrueTrails target history shows the motion history of moving contacts
CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation
24-mile range for early detection of traffic, navigation aids, landfall and weather
Immediate awareness – Quantum starts up and is ready to go in seconds
Superior interference rejection eliminates noise from other radars
Simplified installation with Wi-Fi or thin wire network connectivity
Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners
Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars
Safe emissions – mount Quantum anywhere onboard
Low power consumption for extended battery life under sail

Raymarine Quantum Q24C Radome Wi-Fi Radar, inc. 10m cable

nm_admin — Mon, 07 Mar 2022 04:12:52 +0000

Input Voltage	12 or 24 Vdc (Min: 10.8V, Max: 31.2 V)
Networking	Wi-Fi or wired Ethernet (RayNet)
Antenna Type	Patch Array
Power Consumption	Transmit mode 17W; standby mode 7W; sleep mode 2W
Range	Scales From 1/16 to 24 nautical miles
Transmit Frequency	9354 to 9446 MHz
Peak Power Output	20W
Duplexer	Circulator
Pulse Widths (3 dB)	40 ns to 14.7 μs
CHIRP Lengths	400 ns to 20 μs
CHIRP Bandwidth	Up to 32 MHz
IF Bandwidth	26 MHz
Noise	Less than 4 dB
Max. Range Scale	from 1/16 to 24 nautical miles
Beamwidth (nominal)	4.9º horizontal and 20º vertical
Polarisation	Horizontal
Waterproofing	IPX6
Weight	5.6 kg (12.3 lb)

Raymarine 12V Hydraulic Drive Pumps type 1

nm_admin — Mon, 07 Mar 2022 04:12:42 +0000

Hydraulic steering systems require a hydraulic pump to change the heading of the vessel by creating hydraulic pressure to the steering ram. This pressure changes the rudder, outboard, inboard position and controls the vessel. Ram capacity: 80cc – 230cc Peak Flow Rate (No Load) - 1000cc/min (67in3/min)

Raymarine 12V Hydraulic Drive Pumps type 2

nm_admin — Mon, 07 Mar 2022 04:12:42 +0000

Hydraulic steering systems require a hydraulic pump to change the heading of the vessel by creating hydraulic pressure to the steering ram. This pressure changes the rudder, outboard, inboard position and controls the vessel. Ram capacity: 230cc – 350cc Peak Flow Rate (No Load) - 2000cc/min (122in3/min)

Raymarine 12V Hydraulic Drive Pumps type 3

nm_admin — Mon, 07 Mar 2022 04:12:42 +0000

Hydraulic steering systems require a hydraulic pump to change the heading of the vessel by creating hydraulic pressure to the steering ram. This pressure changes the rudder, outboard, inboard position and controls the vessel. Ram capacity: 350cc – 500cc Peak Flow Rate (No Load) - 2900cc/min (175in3/min)

Raymarine EV-200 Powerboat Hydraulic Autopilot, Pack & Type 1 Pump

nm_admin — Mon, 07 Mar 2022 04:12:42 +0000

EV1 Specifications:

Nominal Power Supply: 12 V (powered by SeaTalk^ng system)
Operating voltage range: 10.8 V to 15.6 V dc
Power consumption: 30 mA
SeaTalk^ng LEN (Load Equivalency Number):1
Waterproofing rating: IPX 6
Operating temperature: -20°C to +55°C (-4°F to +131°F)
Relative Humidity: Max 93%
Sensors: 3 axis digital accelerometer; 3 axis digital compass and 3 axis gyro digital angular rate sensor
Data Connections: SeaTalk^ng
Weight: 0.29kg (0.64 lbs)

ACU-200 Specifications:

Drive Current Output: Maximum Continuous 15A at a supply voltage
Drive Clutch Output: Up to 2.0 A continuous, selectable between 12/24V
Connections: Rudder reference sensor / Sleep switch0 / Power / Drive motor / Drive clutch / Ground
Nominal Supply Voltage: 12V or 24V
Operating Voltage Range: 10.8 V to 31.2 V dc
Power consumption (standby) – Main Power Supply: 300 mA (12/24V)
Power consumption (standby) – SeaTalk^ngPower Supply: 20 mA (12V)
SeaTalk^ngLEN (Load Equivalency Number): 1
SeaTalk^ng: 3 A at 12V (fuse protected at 3 A)
Data Connections: SeaTalk^ng
Installation Environment: Operating Temperature: -20°C to +55°C / Storage Temperature: -30°C to +70°C / Relative Humidity: Max 93%
Waterproof Rating: Drip resistant
Dimensions: 285mm (W) x 211.5mm (H) x 64.5mm (D)
Weight: 2.2kg (4.84lbs)
Conformance: Australia and New Zealand: C-Tick, Compliances Level 2 / Europe: 2004/108/EC

p70Rs Control Head.
The Raymarine p70Rs autopilot control head is a push-button/Rotary operation controller designed primarily for sailboats.

Specifications

Nominal voltage: 12v DC
Voltage range: 9 to 16 v DC
Screen size: 3.5″ TFT LCD 320 x 240 pixels
Colours: 16 bit colour (64k colours)
LCD Brightness: 700cd/m2
Connections: SeaTalkng (x2) (NMEA2000 and SeaTalk compliant)
Operating temperature: -030° to 70°C
Relative humidity: 93% max.
Waterproofing: IPX6
Conformance: Europe 2004/108/EC. Australia and New Zealand C-Tick compliance level 2

Raymarine EV-200 Sailboat Linear Drive Autopilot with linear drive

nm_admin — Mon, 07 Mar 2022 04:12:42 +0000

EV1 Specifications:

Nominal Power Supply: 12 V (powered by SeaTalkng system)

Operating voltage range: 10.8 V to 15.6 V dc

Power consumption: 30 mA

SeaTalkng LEN (Load Equivalency Number):1

Waterproofing rating: IPX 6

Operating temperature: -20°C to +55°C (-4°F to +131°F)

Relative Humidity: Max 93%

Sensors: 3 axis digital accelerometer; 3 axis digital compass and 3 axis gyro digital angular rate sensor

Data Connections: SeaTalkng
Weight: 0.29kg (0.64 lbs)

ACU-200 Specifications:

Drive Current Output: Maximum Continuous 15A at a supply voltage

Drive Clutch Output: Up to 2.0 A continuous, selectable between 12/24V

Connections: Rudder reference sensor / Sleep switch0 / Power / Drive motor / Drive clutch / Ground

Nominal Supply Voltage: 12V or 24V

Operating Voltage Range: 10.8 V to 31.2 V dc

Power consumption (standby) – Main Power Supply: 300 mA (12/24V)

Power consumption (standby) – SeaTalkng Power Supply: 20 mA (12V)

SeaTalkng LEN (Load Equivalency Number): 1

SeaTalkng: 3 A at 12V (fuse protected at 3 A)

Data Connections: SeaTalkng

Installation Environment: Operating Temperature: -20°C to +55°C / Storage Temperature: -30°C to +70°C / Relative Humidity: Max 93%

Waterproof Rating: Drip resistant

Dimensions: 285mm (W) x 211.5mm (H) x 64.5mm (D)

Weight: 2.2kg (4.84lbs)
Conformance: Australia and New Zealand: C-Tick, Compliances Level 2 / Europe: 2004/108/EC

Mechanical Linear Drive Specifications:

Max. Boat Displacement: 24,000lb.

Operating Voltage: 12V DC

Peak Thrust: 650lb.

Max Torque: 6,500 lb.in

Maximum Stroke: 12″ (300mm)

Average Power: 18-36W

Hard-over to hard-over time: 11 seconds
Corepack Used: ACU-200

Notes

A linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer may be required.

An authorized Raymarine dealer is best suited for installing a linear drive system.

Must be able to back-drive steering system from the rudder.

Raymarine Type 1 Mechanical Linear Drive 12V

nm_admin — Mon, 07 Mar 2022 04:12:42 +0000

Mechanical Linear Drive Specifications:

Max. Boat Displacement: 24,000lb.
Operating Voltage: 12V DC
Peak Thrust: 650lb.
Max Torque: 6,500 lb.in
Maximum Stroke: 12″ (300mm)
Average Power: 18-36W
Hard-over to hard-over time: 11 seconds
Corepack Used: ACU-200

Notes

A linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer may be required.
An authorized Raymarine dealer is best suited for installing a linear drive system.
Must be able to back-drive steering system from the rudder.